Propane Regulators

These first stage regulators are used to reduce tank pressures for a second stage regulator to be used downstream (normally 10 PSIG) .

• Maximum Inlet Pressure: 250 PSI
• Outlet Pressure Range: 4 – 12 PSI
• Size Range: POL & 1/4″ – 3/4″ NPT
• Approvals: ULc-C144

These second stage regulators are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to either 11”WC or 2 PSI.

• Maximum Inlet Pressure: 10 PSI
• Outlet Pressure Range: 9″ – 2.2 PSI
• Size Range: 1/2″ – 1″ NPT
• Approvals: ULc-C144

These twin-stage regulators combine first and second stage into one convenient design. Used for short pipe distances for outlet prssures of either 11″wc or 2 PSI.

• Maximum Inlet Pressure: 250 PSI
• Outlet Pressure Range: 9″WC – 2.2 PSI
• Size Range: POL & 1/4″ – 3/4″ NPT
• Approvals: ULc-C144

Desinged to prevent gas outages by switching fom primary to secondairy cylinder when the primary cylinder is depleted. Primairy cylinder can be refilled while still in service

• Maximum Inlet Pressure: 250 PSI
• Outlet Pressure Range: 9″WC – 2.2 PSI
• Size Range: 1/4″ IF x 1/2″ NPT
• Approvals: ULc-C144

These models are used for smaller pipe sizes and lower flows. Installations include portable, RV & home appliances.

• Maximum Inlet Pressure: 250 PSI
• Outlet Pressure Range: 11″WC – 2 PSI
• Size Range: 1/4″ (NPT or IF) x 3/8″ NPT
• Approvals: UL-144

Everything you need such as pigtails, hogtails, manifolds, brackets, vent guards & fittings to complete your installation.