The PD-Mag is a No-Lead positive displacement water meter that can be installed horizontally or vertically for applications such as sub-metering and water utility usage monitoring. The PD-Mag meets AWWA C700 requirements and is NSF61 (non-toxic) and NSF372 (toxic) listed (no lead). With optional pulse output, the PD-Mag can also be used with most devices accepting contact closure (reed switch type) inputs such as remote totalizers and wireless transmitters.

• Capacity Range: 1/2 – 160 GPM (0.11 – 36 m³/hr)
• Maximum Inlet Pressure: 150 PSI
• Size Range: 3/4″ – 2″
• Water: Cold & Hot
• Approvals: NSF/ANSI/CAN 61 & 372

The TM Series Turbine Meter is a horizontal Woltman-type meter with a long-life design that is suitable for low to moderate non-potable water flows. The TM Series meters meet all of ISO 4064’s performance standards. When remote metering is necessary, a low-frequency pulse output is offered. The TM series is designed to be installed horizontally.

• Capacity Range: 2 – 2200 GPM (0.45 – 500 m³/hr)
• Maximum Inlet Pressure: 230 PSI
• Size Range: 2″ – 8″ (larger sizes available)
• Water: Cold (non-potable)

Periodic application of lubricant to plug valves is the only recommended maintenance necessary under normal conditions. Lubrication is essential to the proper operation of the valve. The sealant, actually being the soft bearing seat of the valve, requires replacement when depleted due to flow media, operating temperatures, pressures, and frequency of cycles. Injection of sealant is done by manual injection (hand sticks) or grease gun. Valve cleaner is also available.

Everything you need such as pigtails, hogtails, manifolds, brackets, vent guards & fittings to complete your installation.

Designed to keep water, insects, and debris out of all relief piping, The screen is designed to blow out in relief if it has become blocked.

• Size Range: 3/4″ – 2″

We carry optional gas vents in various styles, sizes and materials including water submerged. Contact Norgas for more information.

• Size Range: 3/4″ – 2″

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled

The SingleMag water meter is a highly accurate, long-lasting meter with a pulse output in a compact design. The polymer composite material is made up of a 50 percent nylon blend that has high strength with good rigidity.

• Capacity Range: 1/4 – 22 GPM (0.06 – 5 m³/hr)
• Maximum Inlet Pressure: 150 PSI
• Size Range: 3/4″
• Water: Cold & Hot
• Approvals: NSF/ANSI/CAN 61 & 372

The MultiMag series water meters use multijet principles for accurate water measurement. These water meters are known for their simplicity, accuracy and longevity. Tested to the most recent AWWA C708 accuracy standards, the MultiMag is designed to be used horizontally. The pulse output capability allows for the MultiMag to be used for remote reading. The MultiMag is available in both hot and cold versions, in addition to several sizes.

• Capacity Range: 1/2 – 160 GPM (0.11 – 36 m³/hr)
• Maximum Inlet Pressure: 150 PSI
• Size Range: 3/4″ – 2″
• Water: Cold & Hot
• Approvals: NSF/ANSI/CAN 61 & 372

The polymer Versamag is the most versatile multijet type water meter for submetering applications. The removable register, in addition to its small design, allows for pressure checks and line flushing without damaging the internal components. The Versamag can be mounted in both horizontal and vertical positions while maintaining AWWA C708 precision. With all of these features, the Versamag is the complete meter for any submetering application.

• Capacity Range: 1/4 – 20 GPM (0.06 – 4.5 m³/hr)
• Maximum Inlet Pressure: 150 PSI
• Size Range: 3/4″
• Water: Cold & Hot
• Approvals: NSF/ANSI/CAN 61 & 372

Designed to vent directly to atmosphere in outdoor installations, these “pop” style relief valves are economical for high pressures with high flows. Brass construction with a weather cap is standard.

• Pressure Range (Setting): 45 – 250 PSI
• Maximum Inlet Pressure: 400 PSI
• Size Range: 3/4″ & 1″ NPT

Unique mechanical gas shut-off timer with built-in emergency stop. Ideally used on BBQs when left unattended. Options include stainless steel cabinets and surface mounts.

• Rated Operating Pressure: 1/2 PSI
• Size Range: 1/2″ NPT
• Applications: Natural & Propane gases
• Approvals: ANSI Z21.21 & CSA 6.5

Designed for applications where accuracy and fast response are critical. It is ideal for commercial/industrial equipment requiring high flow capacities. Internal token relief comes standard.

• Minimum Inlet Pressure: 1 PSI
• Maximum Inlet Pressure: 145 PSI
• Outlet Pressure Range: 7″WC – 21.4 PSI
• Size Range: 2″ & 3″ Flanged

With a variety of sizes and options available, these “pop” style relief valves can be used both outdoors & indoors. Cast iron construction is standard and a weather cap is available.

• Pressure Range (Setting): 0.5 – 300 PSI
• Maximum Inlet Pressure: 500 PSI
• Size Range: 3/4″ – 2″ NPT

Designed for accurate pressure reductions and comes standard with full internal relief. Used for both indoor and outdoor installations. Optional vent limiter for indoor use available

• Minimum Inlet Pressure: 1 PSI
• Maximum Inlet Pressure: 10 – 125 PSI
• Outlet Pressure Range: 2″WC – 5 PSI
• Size Range: 1/2″ – 1-1/4″ NPT
• Approvals: ANSI Z21.80 & CSA 6.22 (Class I & II)

Designed for installation in stationary ASME applications such as bulk plant, skid tanks, underground and above ground containers as the primary pressure relief valve.

• Pressure Range (Setting): 60 – 460 PSI
• Maximum Inlet Pressure: Varies
• Size Range: 1/4″ – 2-1/2″ NPT

Designed for accurate pressure reductions and comes standard with full internal relief. Used for both indoor and outdoor installations. Optional vent limiter for indoor use available

• Minimum Inlet Pressure: 1 PSI
• Maximum Inlet Pressure: 10 – 125 PSI
• Outlet Pressure Range: 3″WC – 3 PSI
• Size Range: 1-1/4″ – 2″ NPT, 2″ & 3″ Flanged
• Approvals: ANSI Z21.80 & CSA 6.22 (Class I & II)

Designed for accurate pressure reductions and comes standard with full internal relief. Used for both indoor and outdoor installations. Optional vent limiter for indoor use available

• Minimum Inlet Pressure: 1 PSI
• Maximum Inlet Pressure: 25 – 125 PSI
• Outlet Pressure Range: 2″WC – 7 PSI
• Size Range: 1-1/4″ – 2″ NPT, 2″ & 3″ Flanged
• Approvals: ANSI Z21.80 & CSA 6.22 (Class I & II)

Designed for accurate pressure reductions and comes standard with full internal relief. Used for both indoor and outdoor installations. Optional vent limiter for indoor use available

• Minimum Inlet Pressure: 1 PSI
• Maximum Inlet Pressure: 25 – 125 PSI
• Outlet Pressure Range: 2″WC – 7 PSI
• Size Range: 1-1/4″ – 2″ NPT, 2″ & 3″ Flanged
• Approvals: ANSI Z21.80 & CSA 6.22 (Class I & II)

Designed primarily for main burner and pilot load applications where precise control of tiny flows is an essential operating requirement.

• Maximum Inlet Pressure: 1/2 PSI
• Outlet Pressure Range: 1″ – 12″WC
• Size Range: 1/8″ – 3/4″ NPT
• Approvals: ANSI Z21.18 & CSA 6.3

The ability of these regulators to handle large capacity appliances with limited supply pressure, offers a definite advantage to designers of commercial and industrial gas-fired equipment.

• Maximum Inlet Pressure: 1/2 PSI
• Outlet Pressure Range: 1″ – 12″WC
• Size Range: 1/2″ – 3″ NPT 4″ Flanged
• Approvals: ANSI Z21.18 & CSA 6.3

Intended for use with both main burner and pilot load applications. The double diaphragm, balanced valve design makes it possible to maintain steady outlet pressure control with widely varying inlet pressures.

• Maximum Inlet Pressure: 1/2 PSI
• Outlet Pressure Range: 1″- 12″WC
• Size Range: 3/8″ – 1″ NPT
• Approvals: ANSI Z21.18 & CSA 6.3

Designed for maximum control functions and lock-up type applications. The double diaphragm, balanced valve design makes it possible to maintain steady outlet pressure control with widely varying inlet pressures.

• Maximum Inlet Pressure: 10 PSI
• Outlet Pressure Range: 1″- 42″WC
• Size Range: 1″ – 3″ NPT 4″ Flanged
• Approvals: ANSI Z21.18 & CSA 6.3

Designed for air/gas mixing applications. The Z models are used for flow control of burners, nozzle mixers, mixing tees and proportional premixers.

• Maximum Inlet Pressure: 1/2 – 5 PSI
• Outlet Pressure Range: (-)1″- (+) 1.5″WC
• Size Range: 3/8″ – 3″ NPT, 4″ Flanged
• Approvals: ANSI Z21.18 & CSA 6.3

A pound to inches regulator designed for use on residential, commercial and industrial applications where adequate inlet pressures are available.

• Maximum Inlet Pressure: 5 PSI
• Outlet Pressure Range: 7″ – 11″WC
• Size Range: 3/8″ – 3/4″ NPT
• Approvals: ANSI Z21.18 & CSA 6.3